Features
1. Lightweight and ultra-thin
The thinnest can 0.8-6mm,and the 1.5-3kg/square meter.No pressure on glass.
2. Customized size
The transparent LED display film supports point-by point cutting and can be applied to curtain walls of various shapes and sizes.
3. Wide viewing angle
160° for each angle, no dead angle and no color bias. Covering people in a larger area and attracts people and traffic in a wider area.
4. Easy Installation
The crystal flex LED film can be stick on the glass surface directly. Then connect the signal and power supply.
5. Bendable
It's LED display but also a soft film LED display,it's highly flexible and can be attached to any glass/walls.
6. High transmittance
It's made of high transparency mesh material,the transparency can reach up to 95%.
7.Multi-piece creative splicing
The digital LED film equipped with multi-screen stitching function in all directions,creating an amazing immersive visual effects.
8.Resume upload from breakpoint
The light-emitting chip uses a micron-level light source and adopts a four-in-one packing method.There are no other electronic components except LED lamp beads.Adopting the solution of resuming transmission at breakpoints,if a single point is broken.It will not affect the normal display of other lamp beads.
Working Principle
This LED thin film,when powered on, the control system sends electrical signals to individual LEDs:
1.Each LED acts as a pixel, lighting up in different colors (typically red, green, and blue).
2.By controlling the brightness and timing of each LED, the film creates dynamic images, text, and videos.
3.When LEDs are off, they are nearly invisible, maintaining high transparency.
The result is a "floating" visual effect where content appears to hover on the glass.
FAQ
|
Product specification |
P8-8 |
|
Pixel pitch |
8mm*8mm(x*y) |
|
Pixel |
15625p;points/m2 |
|
LED specification |
SMD2121 (light drive in one) |
|
Pixel composition |
1R1G1B |
|
Module Size |
1000mm*240mm |
|
Module Resolution |
125*30 |
|
Pixel resolution |
125*125/㎡ |
|
Permeability |
≥85% |
|
Box wiring mode |
Internal wiring (clean back) |
|
Module weight |
≤ 9.5KG/m2 |
|
White balance brightness |
≥2000-2500cd/㎡ |
|
Peak power consumption |
720 W/㎡ |
|
Average power consumption |
About 240 W/㎡ (depending on the video source) |
|
Refresh frequency |
≥3840HZ |
|
Grayscale level |
16Bit |
|
Brightness control level |
Grade 0-255 |
|
Color temperature |
3200K-8500K (adjustable) |
|
Frame change frequency |
≥60Hz |
|
Viewing angle |
H-H140 degrees V-V140 degrees |
|
Input signal |
DVI VGA, composite video |
|
Control screen mode |
Or synchronous box (computer control screen) or asynchronous box (WiFi connection mobile phone APP control screen, USB flash drive control screen) |
|
Protection grade |
IP30 |
|
Power supply requirements |
AC 220V ± 10%, 50-60Hz, (optional wide voltage 110V and 9-36V) |
|
working temperature |
(-0° to 50°C) |
|
Theoretical service life |
100000 hours |