LED transparent film installation is relatively simple, especially the new type of film-type products which can be quickly deployed by "tearing and sticking". No complex steel structure or professional construction team is required, and two people can complete the installation of a standard shop window in half a day.
I.Comparison of Mainstream Installation Methods
|
Installation type |
Is a steel frame required?
|
Construction difficulty
|
Applicable scenarios
|
|
Film-type (crystal screen)
|
× No. |
⭐⭐ easy |
Glass shop windows, display cases, interior partitions
|
|
Box-type transparent screen
|
√ Yes. |
⭐⭐⭐⭐ complex
|
Building curtain walls, stage design, large exhibition halls
|
II.Installation Steps for Adhesive LED Transparent Film (Suitable for Ordinary Users)
Clean Glass: Thoroughly wipe the inside of the glass with alcohol and a lint-free cloth to ensure it is free of dust and oil. This is crucial for a firm adhesion.
Positioning Marks: Use a level to mark the installation boundaries on the glass, ensuring the LED transparent film display is horizontally and vertically aligned. For large screens, it is recommended to apply the this transparent LED film from the center outwards.
Film Application: Peel off the protective film. Two people should work together to slowly apply the adhesive LED transparent film screen from one end, using a scraper to remove air bubbles and avoid wrinkles.
Wiring and Testing: Connect the wires in the order of "Controller → Power Supply → Screen" (power off). After powering on, play a test video to check the display effect.
On-site Cutting (Optional): For curved or irregularly shaped glass, use a utility knife to cut along the gaps between the LED beads. The minimum bending radius is approximately 1 meter.
III. Installation Advantages and Precautions
Advantages:
- No drilling required, does not damage the building structure;
- Can be directly applied to curved and cylindrical glass;
- Appears almost invisible when power is off, does not affect lighting or aesthetics.
Precautions:
The adhesive is strong and difficult to adjust once applied; accurate positioning is essential; For outdoor use, select the IP65 waterproof version and ensure proper sealing of the interfaces; The controller is recommended to be installed on the edge of the glass for easy maintenance.
